CuFe2P CW107C - DIN EN 12449-2019

Grade	CuFe2P
Germany W-Nr.	CW107C
Corresponding Standard	DIN EN 12449-2019 Copper and Copper Alloys - Seamless, Round Tubes for General Purposes
Classification	Copper and Copper Alloys
Density	8.8 g/cm³

CuFe2P Chemical Element Composition Content (%)

Component	Fe	P	Pb	Zn	Other Total	More
Minimum Value	2.1	0.015	-	0.05	-	Cu：Rem.
Maximum Value	2.6	0.15	0.03	0.2	0.2	Cu：Rem.

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

CuFe2P Mechanical Properties

Wall thickness t mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Specified Plastic Yield Strength Rp_0.2 Mpa	Elongation or Extension Rate δ %	Hardness HBW
t≤10	R300 (Annealed condition )	≥300	≤250	≥25
t≤10	H085 (Annealed condition )				80~110
t≤5	R370	≥370	≥250	≥15
t≤5	H110				105~135
t≤5	R420	≥420	≥320	≥5
t≤5	H135				≥130

CuFe2P Corresponding Standards(Same grade name, different standards)

1	EN 1654-1998
	CuFe2P CW107C
2	EN 12166-2016
	CuFe2P CW107C
3	DIN EN 12166-2016
	CuFe2P CW107C
4	DIN 17666-1983
	CuFe2P 2.1310
5	DIN EN 12449-2019
	CuFe2P CW107C
6	EN 12449-2023
	CuFe2P CW107C

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!