CuFe0,1Sn0,1P CW125C - DIN EN 12449-2019

Grade	CuFe0,1Sn0,1P
Germany W-Nr.	CW125C
Corresponding Standard	DIN EN 12449-2019 Copper and Copper Alloys - Seamless, Round Tubes for General Purposes
Classification	Copper and Copper Alloys
Density	8.6 g/cm³

CuFe0,1Sn0,1P Chemical Element Composition Content (%)

Component	Fe	P	Sn	Other Total	More
Minimum Value	0.05	0.015	0.05	-	Cu：Rem.
Maximum Value	0.2	0.055	0.25	0.2	Cu：Rem.

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

CuFe0,1Sn0,1P Mechanical Properties

Wall thickness t mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Specified Plastic Yield Strength Rp_0.2 Mpa	Elongation or Extension Rate δ %
t≤3	R250	≥250	60~100	≥30
t≤3	R270	≥270	100~170	≥40
t≤3	R290	≥290	120~300	≥20
t≤3	R400	≥400	300~520	≥3

CuFe0,1Sn0,1P Corresponding Standards(Same grade name, different standards)

1	DIN EN 12449-2019
	CuFe0,1Sn0,1P CW125C
2	EN 12449-2023
	CuFe0,1Sn0,1P CW125C

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!