Grade CuSn6
Germany W-Nr. CW452K
Corresponding Standard DIN EN 12449-2019
Copper and copper alloys - Seamless, round tubes for general purposes
Classification Copper and Copper Alloys
Density 8.8 g/cm3
CuSn6 Chemical Element Composition Content (%)
Component Fe P Ni Pb Zn Sn Other Total More
Minimum Value - 0.01 - - - 5.5 - Cu:Rem.
Maximum Value 0.1 0.4 0.2 0.02 0.2 7 0.2
"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.
CuSn6 Mechanical Properties
Wall thickness
t
mm
Mark
Tensile Strength
σb
Mpa
Specified Plastic Yield Strength
Rp0.2
Mpa
Elongation or Extension Rate
δ
%
Hardness
HBW
t≤10 R340 (Annealed condition) ≥340 ≤260 ≥50
t≤10 H070 (Annealed condition) 65~100
t≤5 R400 ≥400 ≥220 ≥30
t≤5 H105 100~145
t≤3 R490 ≥490 ≥390 ≥10
t≤3 H140 135~170
t≤2 R580 ≥580 ≥500 ≥5
t≤2 H170 ≥165
1 Approximate Comparison Table bronze
China United States International Organization for Standardization Germany Russia
GB ISC ASTM ISO DIN EN/DIN GOST
QSn6.5-0.4 T51520 94Cu-6Sn-.4P CuSn6 CuSn6 БрОФ6.5-0.4
2 Approximate Comparison Table Cupper and cupper alloy
Japan United States International Organization for Standardization Germany France European Standard Russia Sweden United Kingdom
JIS UNS ISO DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade GOST SS BS EN/BS
C5191 C51900 CuSn6 CuSn6 2.1020 CuSn6P CuSn6 CW452K BrOF6.5-0.15 CuSn6 PB102

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!