Grade CuSn8
Germany W-Nr. CW453K
Corresponding Standard DIN EN 12449-2019
Copper and Copper Alloys - Seamless, Round Tubes for General Purposes
Classification Copper and Copper Alloys
Density 8.8 g/cm3
CuSn8 Chemical Element Composition Content (%)
Component Fe P Ni Pb Zn Sn Other Total More
Minimum Value - 0.01 - - - 7.5 - Cu:Rem.
Maximum Value 0.1 0.4 0.2 0.02 0.2 8.5 0.2
"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.
CuSn8 Mechanical Properties
Wall thickness
t
mm
Mark
Tensile Strength
σb
Mpa
Specified Plastic Yield Strength
Rp0.2
Mpa
Elongation or Extension Rate
δ
%
Hardness
HBW
t≤10 R380 (Annealed condition) ≥380 ≤290 ≥55
t≤10 H080 (Annealed condition) 75~105
t≤5 R450 ≥450 ≥250 ≥25
t≤5 H115 110~155
t≤3 R520 ≥520 ≥440 ≥10
t≤3 H155 150~185
t≤2 R590 ≥590 ≥520 ≥5
t≤2 H180 ≥175
1 Approximate Comparison Table Bronze
China United States International Organization for Standardization Germany European Standard Russia
GB ISC ASTM UNS ISO Numerical Grade DIN EN/DIN W-Nr. EN Numerical Grade GOST
QSn8-0.3 C52100 92Cu-8Sn-.2P C52100 CuSn8 C52100 CuSn8 2.1030
C52100
CuSn8P CW459K БрОФ8-0.3
2 Approximate Comparison Table Copper and Copper Alloy
Japan United States International Organization for Standardization Germany France European Standard Russia United Kingdom
JIS UNS ISO DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade GOST BS EN/BS
C5212 C52100 CuSn8 CuSn8 2.1030 CuSn9P CuSn8 CW453K BrOF7-0.2 PB104

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!