Grade CuCr1Zr
European Standard Steel Grade CW106C
Corresponding Standard EN 12449-2023
Copper and copper alloys - Seamless, round tubes for general purposes
Classification Copper and Copper Alloys
Density 8.9 g/cm3
CuCr1Zr Chemical Element Composition Content (%)
Component Fe Si Cr Zr Other Total More
Minimum Value - - 0.5 0.03 - Cu:Rem.
Maximum Value 0.08 0.1 1.2 0.3 0.2
"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.
CuCr1Zr Mechanical Properties
wall thickness
t
mm
Heat Treatment or Condition
Tensile Strength
σb
Mpa
Specified Plastic Yield Strength
Rp0.2
Mpa
Elongation or Extension Rate
δ
%
Hardness
HBW
t≤25 R260 (Solution heat treated) ≥260 ≥60 ≥30
t≤25 H060 (Solution heat treated) 60~90
t≤20 R300 (Solution heat treated and cold formed) ≥300 ≥250 ≥25
t≤20 H080 (Solution heat treated and cold formed) 80~110
t≤25 350 (Solution heat treated and precipitation hardened) ≥350 ≥240 ≥15
t≤25 H105 (Solution heat treated and precipitation hardened) 105~130
t≤20 R370 (Solution heat treated, cold formed and precipitation hardened) ≥370 ≥250 ≥16
t≤20 H120 (Solution heat treated, cold formed and precipitation hardened) 120~180
t≤15 R430 (Solution heat treated, cold formed and precipitation hardened) ≥430 ≥350 ≥10
t≤15 H140 (Solution heat treated, cold formed and precipitation hardened) 140~190
t≤10 R470 (Solution heat treated, cold formed and precipitation hardened) ≥470 ≥420 ≥8
t≤10 H160 (Solution heat treated, cold formed and precipitation hardened) 160~210
Approximate Comparison Table Cupper and cupper alloy
Germany European Standard
DIN EN/DIN W-Nr. EN Numerical Grade
CuCrZr 2.1293 CuCr1Zr CW106C

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!