中文版
Home Material EN 12449-2023
简体 | 繁體
Grade CuZn35Pb2
European Standard Steel Grade CW601N
Corresponding Standard EN 12449-2023
Copper and copper alloys - Seamless, round tubes for general purposes
Classification Copper and Copper Alloys
Density 8.5 g/cm3
CuZn35Pb2 Chemical Element Composition Content (%)
Component Fe Ni Cu Pb Al Sn Other Total More
Minimum Value - - 62 1.6 - - - Zn：Rem.
Maximum Value 0.1 0.3 63.5 2.5 0.05 0.1 0.1
"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.
CuZn35Pb2 Mechanical Properties
Wall thickness
t
mm		 Heat Treatment or Condition
Tensile Strength
σb
Mpa 		Specified Plastic Yield Strength
Rp0.2
Mpa 		Elongation or Extension Rate
δ
% 		Hardness
HBW
t≤10 R290 (Annealed condition ) ≥290 ≤180 ≥45
t≤10 H060 (Annealed condition ) 55~85
t≤10 R370 ≥370 ≥200 ≥20
t≤10 H085 80~115
t≤5 R440 ≥440 ≥340 ≥10
t≤5 H115 ≥110
Approximate Comparison Table Cupper and cupper alloy
Japan United States International Organization for Standardization Germany France European Standard Russia United Kingdom
JIS UNS ISO DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade GOST BS EN/BS
C3501 C34000 CuZn35Pb1 CuZn36Pb1.5 2.0331 CuZn35Pb2 CuZn35Pb1 CW600N LS63-3 CZ118
CuZn35Pb2 Corresponding Standards(Same grade name, different standards)
1 EN 12166-1998
CuZn35Pb2 CW601N
2 EN 12166-2016
CuZn35Pb2 CW601N
3 DIN EN 12166-2016
CuZn35Pb2 CW601N
4 DIN EN 12166-1998
CuZn35Pb2 CW601N
5 EN 12167-2024
CuZn35Pb2 CW601N
6 DIN EN 12449-2019
CuZn35Pb2 CW601N
7 EN 12449-2023
CuZn35Pb2 CW601N

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!