中文版
Home Material EN 12449-2023
简体 | 繁體
Grade CuZn36Pb2As
European Standard Steel Grade CW602N
Corresponding Standard EN 12449-2023
Copper and Copper Alloys - Seamless, Round Tubes for General Purposes
Classification Copper and Copper Alloys
Density 8.4 g/cm3
CuZn36Pb2As Chemical Element Composition Content (%)
Component Fe Mn Ni Cu As Pb Al Sn Other Total More
Minimum Value - - - 61 0.02 1.7 - - - Zn：Rem.
Maximum Value 0.1 0.1 0.3 63 0.15 2.8 0.05 0.1 0.2
"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.
CuZn36Pb2As Mechanical Properties
Wall thickness
t
mm		 Heat Treatment or Condition
Tensile Strength
σb
Mpa 		Specified Plastic Yield Strength
Rp0.2
Mpa 		Elongation or Extension Rate
δ
% 		Hardness
HBW
t≤10 R290 (Annealed condition ) ≥290 ≤250 ≥40
t≤10 H080 (Annealed condition ) 75~105
t≤10 R370 ≥370 ≥250 ≥20
t≤10 H105 100~135
t≤5 R440 ≥440 ≥340 ≥10
t≤5 H135 ≥130
Approximate Comparison Table Brass
China Japan United States International Organization for Standardization France Russia Australia
GB ISC JIS ASTM UNS ISO Numerical Grade NF EN/NF GOST Australian Standard AS
HPb62-2-0.1 T36210 C3521
C35210 		62Cu-36Zn-2Pb-.1As C35210 CuZn36Pb2As C35210 CuZn36Pb2As
C35210 		ЛСМш62-2-0.1 352C
C35210
CuZn36Pb2As Corresponding Standards(Same grade name, different standards)
1 GB /T 20078-2006
CuZn36Pb2As CW602N
2 EN 12420-2014
CuZn36Pb2As CW602N
3 EN 12167-2024
CuZn36Pb2As CW602N
4 DIN EN 12449-2019
CuZn36Pb2As CW602N
5 EN 12449-2023
CuZn36Pb2As CW602N

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!