CuZn40Mn2Fe1 CW723R - EN 12449-2023

Grade	CuZn40Mn2Fe1
European Standard Steel Grade	CW723R
Corresponding Standard	EN 12449-2023 Copper and Copper Alloys - Seamless, Round Tubes for General Purposes
Classification	Copper and Copper Alloys
Density	8.3 g/cm³

CuZn40Mn2Fe1 Chemical Element Composition Content (%)

Component	Fe	Si	Mn	Ni	Cu	Pb	Al	Sn	Other Total	More
Minimum Value	0.5	-	1	-	56.5	-	-	-	-	Zn：Rem.
Maximum Value	1.5	0.1	2	0.6	58.5	0.5	0.1	0.3	0.4	Zn：Rem.

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

CuZn40Mn2Fe1 Mechanical Properties

Wall thickness t mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Specified Plastic Yield Strength Rp_0.2 Mpa	Elongation or Extension Rate δ %	Hardness HBW
t≤8	R440	≥440	≥170	≥15
t≤8	H115				110~150
t≤8	R490	≥490	≥270	≥10
t≤8	H135				≥130

Approximate Comparison Table Copper and Copper Alloy

Germany		European Standard		Russia	United Kingdom
DIN EN/DIN	W-Nr.	EN	Numerical Grade	GOST	BS EN/BS
CuZn40Mn2	2.0572	CuZn40Mn2Fe1	CW723R	LMTs58-2	CZ136

CuZn40Mn2Fe1 Corresponding Standards(Same grade name, different standards)

1	EN 12163-1998
	CuZn40Mn2Fe1 CW723R
2	DIN EN 12163-1998
	CuZn40Mn2Fe1 CW723R (CuZn40Mn2) (2.0572)
3	DIN EN 12449-2019
	CuZn40Mn2Fe1 CW723R
4	EN 12449-2023
	CuZn40Mn2Fe1 CW723R

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!