Class 60 TAP6400H - JIS H 4600-2007

Grade	Class 60
Other Names
Corresponding Standard	JIS H 4600-2007 Titanium and titanium alloys—Sheets, plates and strips
Classification	Titanium and Titanium Alloys

Class 60 Chemical Element Composition Content (%)

Component	Fe	C	N	V	Al	H	O	Other Individual	Other Total	More
Minimum Value	-	-	-	3.5	5.5	-	-	-	-	Ti:Remainder
Maximum Value	0.4	0.08	0.05	4.5	6.75	0.015	0.2	0.1	0.4	Ti:Remainder

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

Class 60 Mechanical Properties

thickness t mm	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
0.5≤t≤100	≥895	≥825	≥10

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!