Ti1 3.7025 - DIN 17850-1990

Grade	Ti1
Germany W-Nr.	3.7025
Corresponding Standard	DIN 17850-1990 Titanium Chemical Composition
Classification	Titanium and Titanium Alloys
Properties	Corrosion Resistance
Density	4.5 g/cm³

Ti1 Chemical Element Composition Content (%)

Component	Fe	C	N	H	O	Other Individual	Other Total	More
Minimum Value	-	-	-	-	-	-	-	Ti:Remainder
Maximum Value	0.15	0.06	0.05	0.013	0.12	0.1	0.4	Ti:Remainder

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

◎ Where the semi-finished product is intended for use in a highly corrosive environment, the Fe content may be agreed not to exceed 0.10.
◎ For finished or semi-finished products less than 2 mm in thickness or diameter, a maximum hydrogen content of 0.015% is permitted.

Approximate Comparison Table Processing Titanium and Titanium Alloys

Japan	United States	Germany		France	Russia	United Kingdom
JIS	ASTM/AISI	DIN EN/DIN	W-Nr.	NF EN/NF	GOST	BS EN/BS
Cl1	ERTi-1	Ti1	3.7024 3.7025	Ti-P.01	VT1-00 ВТ1-00	IMI115

Ti1 Corresponding Standards(Same grade name, different standards)

1	DIN 17862-2012
	Ti1 3.7025
2	DIN 17860-2010
	Ti1 3.7025
3	DIN 17850-1990
	Ti1 3.7025

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!