中文版
Home Material KS D 3697-2002
简体 | 繁體
Grade STS 316L
Other Names
Corresponding Standard KS D 3697-2002
Stainless steel wires for cold heading and cold forging
Classification Austenitic Stainless Steel
STS 316L Chemical Element Composition Content (%)
Component C Si Mn P S Cr Ni Mo
Minimum Value - - - - - 16 12 2
Maximum Value 0.03 1 2 0.045 0.03 18 15 3
STS 316L Mechanical Properties
diameter or thickness
d
mm		 Mark
Tensile Strength
σb
Mpa 		Elongation or Extension Rate
δ
% 		Reduction of Area
ψ
%
0.8＜d≤2 STS 316L-WSA 560~710 ≥20 ≥70
2＜d≤5.5 STS 316L-WSA 510~660 ≥30 ≥70
0.8＜d≤2 STS 316L-WSB 580~760 ≥10 ≥65
2＜d≤17 STS 316L-WSB 530~710 ≥20 ≥65
Approximate Comparison Table Austenitic Stainless Steel
China Taiwan, China Japan South Korea United States International Organization for Standardization Germany France European Standard Russia Sweden United Kingdom
GB ISC CNS JIS KS ASTM UNS ISO Numerical Grade DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade GOST SS BS EN/BS
022Cr17Ni12Mo2
(00Cr17Ni14Mo2) 		S31603 316L SUS 316L STS 316L 316L S31603 X2CrNiMo 17-12-2
X2CrNiMo17-12-3 		4404-316-03-I
4432-316-03-I 		X2CrNiMo 18-14-3
(X2CrNiMo 18-12) 		1.4435 Z2CND 17-13 X2CrNiMo 17-12-2
X2CrNiMo17-12-3 		1.4404
1.4432 		03Х17Н14М2 2353 316S11
316S12

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!