CuSn6 CW452K - EN 12167-2024

Grade	CuSn6
European Standard Steel Grade	CW452K
Corresponding Standard	EN 12167-2024 Copper and copper alloys - Profiles and bars for general purposes
Classification	Copper and Copper Alloys
Density	8.8 g/cm³

CuSn6 Chemical Element Composition Content (%)

Component	Fe	P	Ni	Pb	Zn	Sn	Other Total	More
Minimum Value	-	0.01	-	-	-	5.5	-	Cu_min:Rem.
Maximum Value	0.1	0.4	0.2	0.02	0.2	7	0.2	Cu_min:Rem.

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

CuSn6 Mechanical Properties

thickness t mm	Mark	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Specified Plastic Yield Strength Rp_0.2 Mpa	Elongation or Extension Rate δ %	Hardness HBW
3≤t≤6	CuSn6-R520	R520	≥520	≥400	≥3(A100), ≥5(A11.3)
3≤t≤40	CuSn6-R420	R420	≥420	≥220	≥20(A100), ≥25(A11.3), ≥30(A)
3≤t≤6	CuSn6-H150	H150				150~180
3≤t≤40	CuSn6-H120	H120				120~155
All specifications	CuSn6-M	M	As manufactured	As manufactured	As manufactured	As manufactured

Test pieces shall be in accordance with EN ISO 6892-1:2019, except that 200 mm gauge length is not permitted.
Elongation requirements for rod of thickness or diameter equivalent to the cross sectional area:
ⓐ less than 4 mm (A100 mm);
ⓑ 4 mm up to and including 8 mm (A 11,3);
ⓒ greater than 8 mm (A);

1 Approximate Comparison Table bronze

China		United States	International Organization for Standardization	Germany	Russia
GB	ISC	ASTM	ISO	DIN EN/DIN	GOST
QSn6.5-0.4	T51520	94Cu-6Sn-.4P	CuSn6	CuSn6	БрОФ6.5-0.4

2 Approximate Comparison Table Cupper and cupper alloy

Japan	United States	International Organization for Standardization	Germany		France	European Standard		Russia	Sweden	United Kingdom
JIS	UNS	ISO	DIN EN/DIN	W-Nr.	NF EN/NF	EN	Numerical Grade	GOST	SS	BS EN/BS
C5191	C51900	CuSn6	CuSn6	2.1020	CuSn6P	CuSn6	CW452K	BrOF6.5-0.15	CuSn6	PB102

CuSn6 Corresponding Standards(Same grade name, different standards)

1	EN 12163-1998
	CuSn6 CW452K
2	EN 12166-1998
	CuSn6 CW452K
3	EN 1654-1998
	CuSn6 CW452K
4	EN 12166-2016
	CuSn6 CW452K
5	DIN 17672-1-1983
	CuSn6 2.1020
6	DIN EN 12163-1998
	CuSn6 CW452K (2.1020)
7	DIN EN 12163-2016
	CuSn6 CW452K
8	DIN 17671-1-1983
	CuSn6 2.1020
9	DIN EN 12166-2016
	CuSn6 CW452K
10	DIN EN 12166-1998
	CuSn6 CW452K
11	ISO 427-1983
	CuSn6
12	EN 12163-2016
	CuSn6 CW452K
13	DIN 2076-1984
	CuSn6
14	EN 12167-2024
	CuSn6 CW452K
15	DIN EN 12449-2019
	CuSn6 CW452K
16	EN 12449-2023
	CuSn6 CW452K

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!