CuZn35Pb2 CW601N - EN 12167-2024

Grade	CuZn35Pb2
European Standard Steel Grade	CW601N
Corresponding Standard	EN 12167-2024 Copper and copper alloys - Profiles and bars for general purposes
Classification	Copper and Copper Alloys
Density	8.5 g/cm³

CuZn35Pb2 Chemical Element Composition Content (%)

Component	Fe	Ni	Cu	Pb	Al	Sn	Other Total	More
Minimum Value	-	-	62	1.6	-	-	-	Zn_min:Rem.
Maximum Value	0.1	0.3	63.5	2.5	0.05	0.1	0.1	Zn_min:Rem.

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

CuZn35Pb2 Mechanical Properties

thickness t mm	Mark	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Specified Plastic Yield Strength Rp_0.2 Mpa	Elongation or Extension Rate δ %	Hardness HBW
3≤t≤10	CuZn35Pb2-R480	R480	≥480	≥350	≥2(A100), ≥5(A11.3), ≥8(A)
3≤t≤10	CuZn35Pb2-R400	R400	≥400	≥200	≥4(A100), ≥8(A11.3), ≥12(A)
3≤t≤20	CuZn35Pb2-R340	R340	≥340	≤280	≥10(A100), ≥15(A11.3), ≥20(A)
3≤t≤10	CuZn35Pb2-H125	H125				≥125
3≤t≤10	CuZn35Pb2-H100	H100				100~140
3≤t≤20	CuZn35Pb2-H070	H070				70~120
All specifications	CuZn35Pb2-M	M	As manufactured	As manufactured	As manufactured	As manufactured

Test pieces shall be in accordance with EN ISO 6892-1:2019, except that 200 mm gauge length is not permitted.
Elongation requirements for rod of thickness or diameter equivalent to the cross sectional area:
ⓐ less than 4 mm (A100 mm);
ⓑ 4 mm up to and including 8 mm (A 11,3);
ⓒ greater than 8 mm (A);

Approximate Comparison Table Cupper and cupper alloy

Japan	United States	International Organization for Standardization	Germany		France	European Standard		Russia	United Kingdom
JIS	UNS	ISO	DIN EN/DIN	W-Nr.	NF EN/NF	EN	Numerical Grade	GOST	BS EN/BS
C3501	C34000	CuZn35Pb1	CuZn36Pb1.5	2.0331	CuZn35Pb2	CuZn35Pb1	CW600N	LS63-3	CZ118

CuZn35Pb2 Corresponding Standards(Same grade name, different standards)

1	EN 12166-1998
	CuZn35Pb2 CW601N
2	EN 12166-2016
	CuZn35Pb2 CW601N
3	DIN EN 12166-2016
	CuZn35Pb2 CW601N
4	DIN EN 12166-1998
	CuZn35Pb2 CW601N
5	EN 12167-2024
	CuZn35Pb2 CW601N
6	DIN EN 12449-2019
	CuZn35Pb2 CW601N
7	EN 12449-2023
	CuZn35Pb2 CW601N

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!