1035 - GB /T 3195-2016

Grade	1035
Corresponding Standard	GB /T 3195-2016 Aluminium and aluminium alloys drawn round wires
Classification	Aluminum and Aluminum Alloys

1035 Chemical Element Composition Content (%)

Component	Fe	Si	Mn	Cu	Ti	V	Al	Zn	Mg	Other Individual
Minimum Value	-	-	-	-	-	-	99.35	-	-	-
Maximum Value	0.6	0.35	0.05	0.1	0.03	0.05	-	0.1	0.05	0.03

Chemical composition according to GB/T 3190-2008

1035 Mechanical Properties

diameter d mm	Mark	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Elongation or Extension Rate δ %
9.5~12.7	1035-O	Annealing (O)	60~100	-
9.5~12.7	1035-H12	Work hardened - 1/4 hard (H12)	80~120	-
9.5~12.7	1035-H22	Work hardened + incomplete annealing - 1/4 hard (H22)	80~120	-
9.5~12.7	1035-H14	Work hardening-1/2 hard (H14)	100~140	-
9.5~12.7	1035-H24	Work hardened + incomplete annealing - 1/2 hard (H24)	100~140	-
9.5~12.7	1035-H16	Work hardened - 3/4 hard (H16)	115~155	-
9.5~12.7	1035-H26	Work hardened + incomplete annealing - 3/4 hard (H26)	115~155	-
1.2~2	1035-H19	Work hardened - Super hard (H19)	≥160	Gauge distance 200mm ≥1.2
>2~2.5			≥175	≥1.5
>2.5~3.5			≥160	≥1.5
>3.5~5.3			≥160	≥1.8
>5.3~6.5			≥155	≥2.2

①T6-solution heat treatment and artificial aging

Approximate Comparison Table Wrought aluminum and aluminum alloy

China	Japan	United States		International Organization for Standardization		European Standard
GB	JIS	ASTM	UNS	ISO	Numerical Grade	EN
1035	1035 A91035	1035	A91035	Al99.35	A91035	EN-AW-Al99.35

1035 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!