3003 - GB /T 3195-2016

Grade	3003
Corresponding Standard	GB /T 3195-2016 Aluminium and aluminium alloys drawn round wires
Classification	Aluminum and Aluminum Alloys

3003 Chemical Element Composition Content (%)

Component	Fe	Si	Mn	Cu	Zn	Other Individual	Other Total	More
Minimum Value	-	-	1	0.05	-	-	-	Al:余量
Maximum Value	0.7	0.6	1.5	0.2	0.1	0.05	0.15	Al:余量

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

Chemical composition according to GB/T 3190-2008

3003 Mechanical Properties

diameter d mm	Mark	Heat Treatment or Condition	Tensile Strength σ_b Mpa
1.6~25	3003-O	Annealing (O)	≤130
1.6~25	3003-H14	Work hardening-1/2 hard (H14)	140~180

①T6-solution heat treatment and artificial aging

3003 Corresponding Standards(Same grade name, different standards)

1	GB /T 3190-2008
	3003
2	JIS H 4040-2006
	3003 A3003 BD A3003 BE A3003 W
3	GB /T 3195-2016
	3003
4	DIN 1725-1-1983
	3003 AlMnCu 3.0517
5	GB /T 3190-2020
	3003
6	JIS H 4040-2015
	3003 A3003 BD A3003 BE A3003 W
7	GB /T 3191-2019
	3003
8	JIS H 4160-1994(R2005)
	3003
9	GB /T 3880.1-2012
	3003

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!