5056 - GB /T 3195-2016

Grade	5056
Corresponding Standard	GB /T 3195-2016 Aluminium and aluminium alloys drawn round wires
Classification	Aluminum and Aluminum Alloys

5056 Chemical Element Composition Content (%)

Component	Fe	Si	Mn	Cr	Cu	Zn	Mg	Other Individual	Other Total	More
Minimum Value	-	-	0.05	0.05	-	-	4.5	-	-	Al：余量
Maximum Value	0.4	0.3	0.2	0.2	0.1	0.1	5.6	0.05	0.15	Al：余量

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

Chemical composition according to GB/T 3190-2008

5056 Mechanical Properties

diameter d mm	Mark	Heat Treatment or Condition	Tensile Strength σ_b Mpa
1.6~25	5056 O	O	≤320

①T6-solution heat treatment and artificial aging

Approximate Comparison Table Wrought Aluminum and Aluminum Alloy

China	Japan	United States	International Organization for Standardization	Germany	United Kingdom
GB	JIS	ASTM	ISO	DIN EN/DIN	BS EN/BS
5056	A5056	5056	AlMg5	AIMg5	N6

5056 Corresponding Standards(Same grade name, different standards)

1	GB /T 3190-2008
	5056
2	JIS H 4040-2006
	5056 A5056 BD A5056 BE A5056 W
3	GB /T 3195-2016
	5056
4	GB /T 3190-2020
	5056
5	JIS H 4040-2015
	5056 A5056 BD A5056 BE A5056 W

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!