Grade 7A03
Old Grade
Corresponding Standard GB /T 3195-2016
Aluminium and aluminium alloys drawn round wires
Classification Aluminum and Aluminum Alloys
7A03 Chemical Element Composition Content (%)
Component Fe Si Mn Cr Cu Ti Zn Mg Other Individual Other Total More
Minimum Value - - - - 1.8 0.02 6 1.2 - - Al:Remainder
Maximum Value 0.2 0.2 0.1 0.05 2.4 0.08 6.7 1.6 0.05 0.1
"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.
Chemical composition according to GB/T 3190-2008
7A03 Mechanical Properties
diameter
d
mm
Mark
Heat Treatment or Condition
Tensile Strength
σb
Mpa
All Sizes 7A03-T6 T6 Shear strength τ
≥285
①T6-solution heat treatment and artificial aging
7A03 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!