Grade 2017
Other Names
Corresponding Standard JIS H 4040-2006
Aluminium and aluminium alloy rods, bars and wires
Classification Aluminum and Aluminum Alloys
Properties Strength Machinability
2017 Chemical Element Composition Content (%)
Component Fe Si Mn Cr Cu Ti Zn Mg Other Individual Other Total More
Minimum Value - 0.2 0.4 - 3.5 - - 0.4 - - Al:余量
Maximum Value 0.7 0.8 1 0.1 4.5 0.15 0.25 0.8 0.05 0.15
"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.
2017 Mechanical Properties
condition Heat Treatment or Condition
Tensile Strength
σb
Mpa
Yield Point
σs
Mpa
Elongation or Extension Rate
δ
%
Extruded Bar Stock Annealing (O) ≤245 ≤125 ≥16
Extruded Bar Stock; s ≤ 700 Solution Heat Treatment + Natural Aging (T4) ≥345 ≥215 ≥12
挤压棒材;700<s≤1000 Solution Heat Treatment + Natural Aging (T4) ≥335 ≥195 ≥12
Drawn Bar Stock, Wire; d ≤ 3 Annealing (O) ≤245
拉制棒材、线材;3<d≤100 Annealing (O) ≤245 ≥16
拉制棒材、线材;3<d≤10 Strain-Hardening - 3/8 Hard (H13) 205~275
Drawn Bar Stock, Wire; d ≤ 3 Solution Heat Treatment + Natural Aging (T4) ≥380
拉制棒材、线材;3<d≤100mm;s≤300 Solution Treatment + Natural Aging (T42) ≥380 ≥225 ≥12
d: diameter, thickness or width across flats;unit mm
s: cross section area; unit cm²
A、A50mm-gauge length
1 Approximate Comparison Table Wrought aluminum and aluminum alloy
China Japan United States International Organization for Standardization Germany European Standard
GB JIS ASTM UNS ISO Numerical Grade DIN EN/DIN W-Nr. EN
2017 2017
A92017
2017 A92017 AlCu4MgSi A92017 AlCu4Mg1 3.1325
A92017
EN-AW-AlCu4MgSi
2 Approximate Comparison Table Aluminium and aluminium alloy
Japan United States International Organization for Standardization Germany France European Standard Russia
JIS UNS ISO DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade GOST
2017 A92017 AlCuMgSi AlCuMg1 3.1325 2017A ENAW-AlCu4MgSi(A) ENAW-2017A D1

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!