2219 A2219 BD A2219 BDS - JIS H 4040-2006

Grade	2219
Other Names
Corresponding Standard	JIS H 4040-2006 Aluminium and aluminium alloy rods, bars and wires
Classification	Aluminum and Aluminum Alloys
Properties	Strength Weldability

2219 Chemical Element Composition Content (%)

Component	Fe	Si	Mn	Cu	Ti	V	Zr	Zn	Mg
Minimum Value	-	-	0.2	5.8	0.02	0.05	0.1	-	-
Maximum Value	0.3	0.2	0.4	6.8	0.1	0.15	0.25	0.1	0.02

2219 Mechanical Properties

diameter,thickness or width arcoss flats d mm	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
10≤d≤50	Drawing rod solution treatment + cold working + artificial aging (T851) ≥400	Drawing rod solution treatment + cold working + artificial aging (T851) ≥275	Elongation Percentage at L0=5.65√So ≥3
50≤d≤100	≥395	≥270	≥3

d: diameter, thickness or width across flats；unit mm
s: cross section area; unit cm²
A、A50mm-gauge length

Approximate Comparison Table Wrought Aluminum and Aluminum Alloy

China	Japan	United States		International Organization for Standardization		Germany	France	Russia
GB	JIS	ASTM	UNS	ISO	Numerical Grade	DIN EN/DIN	NF EN/NF	GOST
2219	2219 A92219	2219	A92219	AlCu6Mn	A92219	EN-AW-AlCu6Mn	A-U6M 2219 A92219	1201

2219 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!