AlCu6BiPb EN AW-2011 3.1655 EN AW-AlCu6BiPb - DIN EN 1301-2-2008

Grade	AlCu6BiPb
Germany W-Nr.	EN AW-2011
Other Names
Old Grade
Corresponding Standard	DIN EN 1301-2-2008 Aluminium and aluminium alloys-drawn wires-Part 2: Mechanical properties
Classification	Aluminum and Aluminum Alloys

AlCu6BiPb Chemical Element Composition Content (%)

Component	Fe	Si	Cu	Pb	Zn	Bi	Other Individual	Other Total	More
Minimum Value	-	-	5	0.2	-	0.2	-	-	Al：余量
Maximum Value	0.7	0.4	6	0.6	0.3	0.6	0.05	0.15	Al：余量

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

AlCu6BiPb Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
Drawing wire; d≤18	Solution Heat Treatment + Cold Work + Natural Aging (T3)	≥310	295	6
Drawing wire; d≤18	Solution Heat Treatment + Cold Work + Artificial Aging (T8)	≥370	310	4
Drawing wire; d≤18	Strain-Hardening - 3/8 Hard (H13)	155~255
Drawn wire; d≤10	Strain - Hardening - 4/4 Hard (H18)	≥240

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!