AlMn1Cu EN AW-3003 3.0517 EN AW-AlMn1Cu - DIN EN 1301-2-2008

Grade	AlMn1Cu
Germany W-Nr.	EN AW-3003
Other Names
Old Grade
Corresponding Standard	DIN EN 1301-2-2008 Aluminium and aluminium alloys-drawn wires-Part 2: Mechanical properties
Classification	Aluminum and Aluminum Alloys

AlMn1Cu Chemical Element Composition Content (%)

Component	Fe	Si	Mn	Cu	Zn	Other Individual	Other Total
Minimum Value	-	-	1	0.05	-	-	-
Maximum Value	0.7	0.6	1.5	0.2	0.1	0.05	0.15

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

AlMn1Cu Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
Drawn wire; d≤20	Annealing (O)	≤130	60	35
Drawing wire; d≤18	Strain - Work hardened - 1/2 hard (H18)	135~180	120	5
Drawn wire; d≤10	Strain - Hardening - 4/4 Hard (H18)	≥180	175	3

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!