中文版
Home Material DIN EN 1301-2-2008
简体 | 繁體
Grade AlMg1SiCu
Germany W-Nr. EN AW-6061
Other Names
Old Grade
Corresponding Standard DIN EN 1301-2-2008
Aluminium and aluminium alloys-drawn wires-Part 2: Mechanical properties
Classification Aluminum and Aluminum Alloys
AlMg1SiCu Chemical Element Composition Content (%)
Component Fe Si Mn Cr Cu Ti Zn Mg Other Individual Other Total More
Minimum Value - 0.4 - 0.04 0.15 - - 0.8 - - Al：余量
Maximum Value 0.7 0.8 0.15 0.35 0.4 0.15 0.25 1.2 0.05 0.15
"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.
AlMg1SiCu Mechanical Properties
condition Heat Treatment or Condition
Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
%
Drawing wire; d≤18 Strain-Hardening - 3/8 Hard (H13) 150~210 120 A100
4
Drawn wire; d≤10 Strain - Hardening - 4/4 Hard (H18) ≥210
Drawn Wire; d<6 Solution heat treatment + cold working + natural aging (T39) ≥310
Drawing Wire; d≥6 Solution heat treatment + cold working + natural aging (T39) ≥260
Drawn wire; d≤20 Solution Heat Treatment + Natural Aging (T4) 205~285 135 13
Drawn wire; d≤20 Solid Solution Heat Treatment + Artificial Aging (T6) ≥290 260 10
Drawn Wire; d<6 Solution heat treatment + cold working + artificial aging (T89) ≥300
Approximate Comparison Table Aluminium and aluminium alloy
Japan United States International Organization for Standardization Germany European Standard
JIS ASTM ISO DIN EN/DIN W-Nr. EN Numerical Grade
6061 AA6061 AlMg1SiCu AlMg1SiCu 3.3211 ENAW-AlMg1SiCu ENAW-6061
AlMg1SiCu Corresponding Standards(Same grade name, different standards)
1 DIN EN 1301-2-2008
AlMg1SiCu EN AW-6061 (3.3211) EN AW-AlMg1SiCu
2 DIN 1725-1-1983
AlMg1SiCu 3.3211 6061

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!