AlZn5.5MgCu EN AW-7075 3.4365 EN AW-AlZn5.5MgCu - DIN EN 1301-2-2008

Grade	AlZn5.5MgCu
Germany W-Nr.	EN AW-7075
Other Names
Old Grade
Corresponding Standard	DIN EN 1301-2-2008 Aluminium and aluminium alloys-drawn wires-Part 2: Mechanical properties
Classification	Aluminum and Aluminum Alloys

AlZn5.5MgCu Chemical Element Composition Content (%)

Component	Fe	Si	Mn	Cr	Cu	Ti	Zn	Mg	Other Individual	Other Total	More
Minimum Value	-	-	-	0.18	1.2	-	5.1	2.1	-	-	Al:余量；Zr + Ti≤0.25*
Maximum Value	0.5	0.4	0.3	0.28	2	0.2	6.1	2.9	0.05	0.15	Al:余量；Zr + Ti≤0.25*

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

AlZn5.5MgCu Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
Drawn wire; d≤20	Annealing (O)	≤275	110	13
Drawing wire; d≤18	Strain-Hardening - 3/8 Hard (H13)	230~310	230	2.5
Drawn wire; d≤10	Strain - Work hardened - 4/4 hard (H18)	≤285	260	2
Drawn wire; d≤20	Solid Solution Heat Treatment + Artificial Aging (T6)	≤510	485	10

AlZn5.5MgCu Corresponding Standards(Same grade name, different standards)

1	DIN EN 1301-2-2008
	AlZn5.5MgCu EN AW-7075 (3.4365) EN AW-AlZn5.5MgCu
2	ISO 209-2007
	(AlZn5.5MgCu) 7075

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!