201L S20103 - ASTM A 666/A666M-2024

Grade	201L
USA UNS	S20103
Corresponding Standard	ASTM A666/A666M-2024 Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar
Classification	Austenitic Stainless Steel

201L Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	N
Minimum Value	-	-	5.5	-	-	16	3.5	-
Maximum Value	0.03	0.75	7.5	0.045	0.03	18	5.5	0.25

201L Mechanical Properties

Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Annealing	≥655	≥260	≥40	≤217
1/16 Hard	≥690	≥345	≥40
1/8 Hard	≥725	≥380	≥35
1/4 Hard	≥825	≥515	≥25
1/2 Hard	≥930	≥690	≥22 (thickness ≤ 0.38mm); ≥20 (thickness＞0.76mm)

201L Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!