N02200 - ASTM B160-2024

Chemical Element Composition Content (%)

Component	Fe	C	Si	Mn	S	Ni	Cu
Minimum Value	-	-	-	-	-	99	-
Maximum Value	0.4	0.15	0.35	0.35	0.01	-	0.25

Mechanical Properties

diameter or distance between parallel surfaces d mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Specified Plastic Yield Strength Rp_0.2 Mpa	Elongation or Extension Rate δ %
Round, d≤25.4	Cold-worked	≥550	≥415	② ≥10
Round, 25.4＜d≤101.6	Cold-worked	≥515	≥345	≥15
Square, hexagon, and rectangle, all size	Cold-worked	≥450	≥275	② ≥25
All section, all size	Hot-worked	≥415	≥105	① ≥35
Rod and bar, all size	Annealed	≥380	≥105	② ≥40

Approximate Comparison Table Corrosion-Resistant Alloy

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!