N12160 - ASTM SB-435

Commercial Grade
USA UNS	N12160
Corresponding Standard	ASME SB-435-2023 UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Plate, Sheet, and Strip
Classification	Nickel and Nickel Alloys
Density	8.08 g/cm³

Chemical Element Composition Content (%)

Component	Fe	C	Si	Mn	P	S	Cr	Mo	Ti	W	Co	Cb	More
Minimum Value	-	-	2.4	-	-	-	26	-	0.2	-	27	-	Ni:Remainder
Maximum Value	3.5	0.15	3	1.5	0.03	0.015	30	1	0.8	1	33	1	Ni:Remainder

Mechanical Properties

Heat Treatment or Condition	Tensile Strength σ_b Mpa	Specified Plastic Yield Strength Rp_0.2 Mpa	Elongation or Extension Rate δ %
Solution annealed at 1065°C minimum	≥620	≥240	≥40

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!