N06650 - ASME SB-446 - H2ABC

中文版

	N06650
Corresponding Standard	ASME SB-446 Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625), Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219), and Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06650) Rod and Bar
Classification	Nickel and Nickel Alloys

Chemical Element Composition Content (%)

Component	Fe	C	Si	Mn	P	S	Cr	Cu	Mo	N	W	Co	Al	More
Minimum Value	12	-	-	-	-	-	19	-	9.5	0.05	0.5	-	0.05	Cb+Ta:0.05~0.5；Ni:Balance
Maximum Value	16	0.03	0.5	0.5	0.02	0.01	21	0.3	12.5	0.2	2.5	1	0.5	Cb+Ta:0.05~0.5；Ni:Balance

Mechanical Properties

diameter or distance between parallel surface d mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Specified Plastic Yield Strength Rp_0.2 Mpa	Elongation or Extension Rate δ %
Hot/cold-worked bar；all sizes	Solution Annealed	≥800	≥400	≥45

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!