中文版
Home Material ASME SB-446
简体 | 繁體
N06219
Corresponding Standard ASME SB-446
Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625), Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219), and Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06650) Rod and Bar
Classification Nickel and Nickel Alloys
Chemical Element Composition Content (%)
Component Fe C Si Mn P S Cr Cu Mo Ti Co Al More
Minimum Value 2 - 0.7 - - - 18 - 7 - - - Ni:Balance
Maximum Value 4 0.05 1.1 0.5 0.02 0.01 22 0.5 9 0.5 1 0.5
Mechanical Properties
diameter or distance between parallel surface
d
mm		 Heat Treatment or Condition
Tensile Strength
σb
Mpa 		Specified Plastic Yield Strength
Rp0.2
Mpa 		Elongation or Extension Rate
δ
%
Hot/cold-worked bar；all sizes Solution Annealed ≥660 ≥270 ≥50

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!