C10 - JIS G 7105-2000

Grade	C10
Corresponding Standard	JIS G 7105-2000 Heat-Treatable Steels, Alloy Steels and Free-Cutting Steels — Part 18 : Bright Products Of Unalloyed and Low Alloy Steels
Classification	Carbon Steel
Properties	Carburizing Capability

C10 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S
Minimum Value	0.07	0.15	0.3	-	-
Maximum Value	0.13	0.4	0.6	0.035	0.035

◎ A lower silicon content may be agreed upon at the time of enquiry and order; in this case, the influence on mechanical properties should be taken into account.

C10 Mechanical Properties

thickness t mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
t≤5	TC	≥500	≥400	≥7
5＜t≤10	TC	≥470	≥360	≥8
10＜t≤16	TC	≥420	≥310	≥9
16＜t≤25	TC	≥400	≥285	≥10
25＜t≤40	TC	≥390	≥270	≥11
40＜t≤100	TC	≥340	≥170	≥12
100＜t≤160	TC	Be agreed	Be agreed	Be agreed
Steel	TC+TA， P+TA或 G+TA				≤131

C10 Corresponding Standards(Same grade name, different standards)

1	DIN 17210-1986
	C10 1.0301
2	ISO 683-18-1996
	C10
3	EN 10277-2-2008
	C10 1.0301
4	DIN 1652-1963
	C10 1.0301
5	Q/BQB 360-2009
	C10
6	UNI 8550-1984
	C 10
7	Q/BQB 130-2003
	C10
8	JIS G 7105-2000
	C10

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!