Grade X2CrNiMoN17-11-2
European Standard Steel Grade 1.4406
Corresponding Standard EN 10272-2016
Stainless Steel Bars for Pressure Purposes
Classification Austenitic Stainless Steel
X2CrNiMoN17-11-2 Chemical Element Composition Content (%)
Component C Si Mn P S Cr Ni Mo N
Minimum Value - - - - - 16.5 10 2 0.12
Maximum Value 0.03 1 2 0.045 0.015 18.5 12.5 2.5 0.22
① Particular ranges of sulfur content may provide improvement of particular properties. For machinability, a controlled sulfur content of 0,015 % to 0,030 % is recommended and may be agreed. For weldability, a controlled sulfur content of 0,008 % to 0,030 % is recommended and may be agreed.
X2CrNiMoN17-11-2 Mechanical Properties
Diameter or thickness
d or b
mm
Tensile Strength
σb
Mpa
Specified Plastic Yield Strength
Rp0.2
Mpa
Elongation or Extension Rate
δ
%
Hardness
HBW
Impact Energy Absorption
KV2
J
≤160 580~800 Rp0.2:≥280
Rp1.0:≥315
l: ≥40 ≤250 (at 20℃):l ≥100
(at -196℃):≥60
160<d (b)≤400 580~800 Rp0.2:≥280
Rp1.0:≥315
tr: ≥30 ≤250 (at 20℃):tr ≥60
(at -196℃):≥ 60
a) Axial: l;Tangential:tr.
* The maximum HBW-values may be raised by 100 units or the tensile strength value may be raised by 200 MPa and the minimum elongation value be lowered to 20 % for bars of ≤ 35 mm thickness having a final cold deformation.
Approximate Comparison Table Austenitic Stainless Steel
Japan United States France European Standard United Kingdom
JIS ASTM NF EN/NF EN Numerical Grade BS EN/BS
SUS316LN 316LN Z3CND17-11Az X2CrNiMoN17-11-2 1.4406 316S61

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!