X2CrNiMo18-14-3 1.4435 - EN 10272-2016

Grade	X2CrNiMo18-14-3
European Standard Steel Grade	1.4435
Corresponding Standard	EN 10272-2016 Stainless steel bars for pressure purposes
Classification	Austenitic Stainless Steel

X2CrNiMo18-14-3 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S ^①	Cr	Ni	Mo	N
Minimum Value	-	-	-	-	-	17	12.5	2.5	-
Maximum Value	0.03	1	2	0.045	0.015	19	15	3	0.1

① Particular ranges of sulfur content may provide improvement of particular properties. For machinability, a controlled sulfur content of 0,015 % to 0,030 % is recommended and may be agreed. For weldability, a controlled sulfur content of 0,008 % to 0,030 % is recommended and may be agreed.

X2CrNiMo18-14-3 Mechanical Properties

Diameter or thickness d or b mm	Tensile Strength σ_b Mpa	Specified Plastic Yield Strength Rp_0.2 Mpa	Elongation or Extension Rate δ %	Hardness HBW	Impact Energy Absorption KV2 J
≤160	500~700	Rp0.2：≥200 Rp1.0：≥235	l: ≥40	≤215	(at 20℃)：l ≥100 (at -196℃)：≥60
160<d (b)≤400	500~700	Rp0.2：≥200 Rp1.0：≥235	tr: ≥30	≤215	(at 20℃)：tr ≥60 (at -196℃)：≥ 60

a) Axial： l；Tangential：tr.

* The maximum HBW-values may be raised by 100 units or the tensile strength value may be raised by 200 MPa and the minimum elongation value be lowered to 20 % for bars of ≤ 35 mm thickness having a final cold deformation.

Approximate Comparison Table

China	Japan	United States	International Organization for Standardization	Germany	France	European Standard		Russia	Sweden	United Kingdom
GB	JIS	ASTM	ISO	DIN EN/DIN	NF EN/NF	EN	Numerical Grade	GOST	SS	BS EN/BS
00Cr17Ni14Mo2	SUS316L	316L TP316L	Type19a	X2CrNiMo18-14-3	Z3CND17-12-03 Z3CND18-14-03	X2CrNiMo18-14-3	1.4435	03KH17N14M3	2353	316S13 316S14

X2CrNiMo18-14-3 Corresponding Standards(Same grade name, different standards)

1	EN 10088-1-2005
	X2CrNiMo 18-14-3 1.4435
2	EN 10253-4-2003
	X2CrNiMo18-14-3 1.4435
3	EN 10250-4-1999
	X2CrNiMo 18-14-3 1.4435
4	ISO TS 15510-2003
	X2CrNiMo18-14-3
5	EN 10088-2-2005
	X2CrNiMo18-14-3 1.4435
6	DIN 17440-1972
	X2CrNiMo 18-14-3 X2CrNiMo 18-12 1.4435
7	EN 10088-3-2005
	X2CrNiMo 18-14-3 1.4435
8	EN 10297(2)-2005
	X2CrNiMo18-14-3 1.4435
9	EN 10088-3-2014
	X2CrNiMo18-14-3 1.4435
10	ISO 15510-2014
	X2CrNiMo18-14-3 4435-316-91-I
11	ISO 9328-7-2018
	X2CrNiMo18-14-3
12	DIN EN 10088-3-2014
	X2CrNiMo18-14-3 1.4435
13	NF EN 10088-2-2005
	X2CrNiMo18-14-3 1.4435
14	NF EN 10088-1-2005
	X2CrNiMo18-14-3 1.4435
15	NF EN 10028-7-2008
	X2CrNiMo18-14-3 1.4435
16	NF EN 10296-2-2005
	X2CrNiMo18-14-3 1.4435
17	NF EN 10028-7-2000
	X2CrNiMo18-14-3 1.4435
18	DIN EN 10296-2-2006
	X2CrNiMo18-14-3 1.4435
19	EN 10272-2016
	X2CrNiMo18-14-3 1.4435

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!