Grade X2CrNiMoN17-13-5
European Standard Steel Grade 1.4439
Corresponding Standard EN 10272-2016
Stainless steel bars for pressure purposes
Classification Austenitic Stainless Steel
X2CrNiMoN17-13-5 Chemical Element Composition Content (%)
Component C Si Mn P S Cr Ni Mo N
Minimum Value - - - - - 16.5 12.5 4 0.12
Maximum Value 0.03 1 2 0.045 0.015 18.5 14.5 5 0.22
X2CrNiMoN17-13-5 Mechanical Properties
Diameter or thickness
d or b
mm
Tensile Strength
σb
Mpa
Specified Plastic Yield Strength
Rp0.2
Mpa
Elongation or Extension Rate
δ
%
Hardness
HBW
Impact Energy Absorption
KV2
J
≤160 580~800 Rp0.2:≥280
Rp1.0:≥315
l: ≥35 ≤250 (at 20℃):l ≥100
(at -196℃):≥60
160<d (b)≤400 580~800 Rp0.2:≥280
Rp1.0:≥315
tr: ≥30 ≤250 (at 20℃):tr ≥60
(at -196℃):≥ 60
a) Axial: l;Tangential:tr.
* The maximum HBW-values may be raised by 100 units or the tensile strength value may be raised by 200 MPa and the minimum elongation value be lowered to 20 % for bars of ≤ 35 mm thickness having a final cold deformation.
1 Approximate Comparison Table Austenitic Stainless Steel
China United States International Organization for Standardization European Standard
GB ISC AISI UNS ISO Numerical Grade EN Numerical Grade
022Cr19Ni16Mo5N S31723 317LMN S31726 X2CrNiMoN17-13-5
X2CrNiMoN 18-15-5
4439-317-26-E
4483-317-26-I
X2CrNiMoN17-13-5 1.4439
(1.4483)
2 Approximate Comparison Table Austenitic Stainless Steel
United States France European Standard
ASTM UNS NF EN/NF EN Numerical Grade
317LMN S31726 Z3CND18-14-05Az X2CrNiMoN17-13-5 1.4439

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!