中文版
Home Material DIN EN 1301-2-2008
简体 | 繁體
Grade AlMg2.5
Germany W-Nr. EN AW-5052
Other Names
Old Grade
Corresponding Standard DIN EN 1301-2-2008
Aluminium and aluminium alloys-drawn wires-Part 2: Mechanical properties
Classification Aluminum and Aluminum Alloys
Properties Weldability
AlMg2.5 Chemical Element Composition Content (%)
Component Fe Si Mn Cr Cu Zn Mg Other Individual Other Total More
Minimum Value - - - 0.15 - - 2.2 - - Al:余量
Maximum Value 0.4 0.25 0.1 0.35 0.1 0.1 2.8 0.05 0.15
"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.
AlMg2.5 Mechanical Properties
condition Mark
Heat Treatment or Condition
Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
%
Drawn wire; d≤20 AlMg2.5 O Annealing (O) ≤225 100 A100
15
Drawing wire; d≤18 AlMg2.5 H14 Strain-Hardening - 1/2 Hard (H14) 225~275 225 4
Drawn wire; d≤10 AlMg2.5 H18 Strain - Hardening - 4/4 Hard (H18) ≥275 275 3
Drawing wire; d≤18 AlMg2.5 H32 Strain-hardening + stabilization - 1/4 hard (H32) 190~240 145 11
Drawn Wire; d≤15 AlMg2.5 H34 Strain-hardening + stabilization - 1/2 hard (H34) 215~265 195 8
Drawn wire; d≤10 AlMg2.5 H38 Strain-hardening + stabilization - 4/4 hard (H38) ≥260 245 5
1 Approximate Comparison Table Wrought Aluminum and Aluminum Alloy
China United States International Organization for Standardization Germany European Standard Russia
GB ISC ASTM UNS ISO Numerical Grade DIN EN/DIN W-Nr. EN GOST
5A02
(LF2) 		5052 5052 A95052 AlMg2.5 A95052 AlMg2.5 3.3523
A95052 		EN-AW-AlMg2.5 АМг2.5
2 Approximate Comparison Table Aluminium and Aluminium Alloy
Japan United States International Organization for Standardization Germany France European Standard Sweden United Kingdom
JIS UNS ISO DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade SS BS EN/BS
5052 A95052 AlMg2 AlMg1.8
AlMg2.5 		3.3326 5052 ENAW-AlMg2(B) ENAW-5051A AlMg2.5 5251
3 Approximate Comparison Table Wrought Aluminum and Aluminum Alloy
China Japan United States International Organization for Standardization Germany United Kingdom
GB JIS ASTM ISO DIN EN/DIN BS EN/BS
5A02 A5052 5052 AlMg2.5 AlMg2.5 N4
AlMg2.5 Corresponding Standards(Same grade name, different standards)
1 DIN EN 1301-2-2008
AlMg2.5 EN AW-5052 (3.3523) EN AW-AlMg2.5
2 DIN 1725-1-1983
AlMg2.5 3.3523 5052

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!