S355J2H 1.0576 - EN 10219-1-2006

Grade	S355J2H
European Standard Steel Grade	1.0576
Corresponding Standard	EN 10219-1-2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
Classification	Carbon Steel

S355J2H Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	More
Minimum Value	-	-	-	-	-	CEV: ≤ 0.45%
Maximum Value	0.22	0.55	1.6	0.03	0.03	CEV: ≤ 0.45%

① The deoxidation method Is designated as follows: FF Fully killed steel containing nitrogen binding elements in amounts sufficient to bind available nitrogen (e.g. min. 0,020 % total Al or 0,015 % soluble Al).

S355J2H Mechanical Properties

Thickness t mm	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Impact Energy Absorption KV2 J
t≤16		ReH: ≥355	① ≥20
16＜t≤40		ReH: ≥345	≥20
t≤3	510~680
3＜t≤40	470~630
				≥27

S355J2H Corresponding Standards(Same grade name, different standards)

1	EN 10210-1-2006
	S355J2H 1.0576
2	EN 10219-1-2006
	S355J2H 1.0576

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!