S460MH 1.8849 - EN 10219-1-2006

Grade	S460MH
European Standard Steel Grade	1.8849
Corresponding Standard	EN 10219-1-2006 Cold Formed Welded Structural Hollow Sections of Non-Alloy and Fine Grain Steels - Part 1: Technical Delivery Conditions
Classification	Alloy Steel

S460MH Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Ni	Mo ^③	N	Ti	V	Nb	Al ^②	More
Minimum Value	-	-	-	-	-	-	-	-	-	-	-	0.02	CEV: ≤ 0.46%
Maximum Value	0.16	0.6	1.7	0.035	0.03	0.3	0.2	0.025	0.05	0.12	0.05	-	CEV: ≤ 0.46%

① The deoxidation method is designated as follows: GF = Fully killed steel containing nitrogen binding elements in amounts sufficient to bind the available nitrogen and having a fine grained structure.
② If sufficient N-binding elements are present, the minimum total Al content does not apply.
③ The total sum of Cr, Cu and Mo shall not be higher than 0,60 %.

S460MH Mechanical Properties

Thickness t mm	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Impact Energy Absorption KV2 J
t≤16	530~720	ReH: ≥460	① ≥17
16＜t≤40	530~720	ReH: ≥440	≥17
				② ≥40

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!