B316 2024 - ASTM B 316/B316M-2015

Grade	B316 2024
Corresponding Standard	ASTM B316/B316M-2015 Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods
Classification	Aluminum and Aluminum Alloys

B316 2024 Chemical Element Composition Content (%)

Component	Fe	Si	Mn	Cr	Cu	Ti	Zn	Mg
Minimum Value	-	-	0.3	-	3.8	-	-	1.2
Maximum Value	0.5	0.5	0.9	0.1	4.9	0.15	0.25	1.8

B316 2024 Mechanical Properties

diameter d mm	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Fatigue Limit Bending σ-1 Mpa	Elongation or Extension Rate δ %
3.2＜d≤25	Solution Treatment + Natural Aging (T42) ≥425	Solution Treatment + Natural Aging (T42) ≥275	Shear Strength στ/Mpa ≥255	Solution Treatment + Natural Aging (T42) ≥10
1.6＜d≤3.2	Solution Treatment + Natural Aging (T42) ≥425		Shear Strength στ/Mpa ≥255
d≤25	Strain-Hardening (H13) 220~290
d≤25	Annealing ≤240

B3162024 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!