ACuZinc5 Z46541 - ASTM B86-2018

Grade	ACuZinc5
USA UNS	Z46541
Corresponding Standard	ASTM B86-2018 Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings
Classification	Zinc and Zinc Alloys
Density	6.85 g/cm³

ACuZinc5 Chemical Element Composition Content (%)

Component	Fe	Cu	Pb	Al	Sn	Mg	Cd	More
Minimum Value	-	5	-	2.5	-	0.025	-	Zn:Remainder
Maximum Value	0.075	6	0.005	3.3	0.003	0.05	0.004	Zn:Remainder

• Zinc-aluminum ingot for foundry and pressure die casting may contain chrome, manganese, or nickel in amounts of up to 0.01 % each or 0.03 % total. No harmful effects have ever been noted due to the presence
of these elements in up to these concentrations and, therefore, analyses are not required for these elements.

ACuZinc5 Mechanical Properties

condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
压铸（B50）	355	284	9.4	* 105~115
压铸（B1）	310	240	4.6	105~115

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!