LM24 Al-Si8Cu3.5 - BS 1490-1988

Grade	LM24
Other Names
Corresponding Standard	BS 1490-1988 Aluminium and Aluminium Alloy Ingots and Castings for General Engineering Purposes
Classification	Aluminum and Aluminum Alloys

LM24 Chemical Element Composition Content (%)

Component	Fe	Si	Mn	Ni	Cu	Ti	Pb	Zn	Sn	Mg	Other Total	More
Minimum Value	-	7.5	-	-	3	-	-	-	-	-	-	Al:Remainder
Maximum Value	1.3	9.5	0.5	0.5	4	0.2	0.3	3	0.2	0.3	0.5	Al:Remainder

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

LM24 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Elongation or Extension Rate δ %
Chill cast	As cast (M)	≥180	≥1.5

1 Approximate Comparison Table Cast aluminium alloy

United States	International Organization for Standardization	European Standard	United Kingdom	Australia
ASTM	ISO	EN	BS EN/BS	Australian Standard AS
A380	AlSi8Cu3Fe	AlSi8Cu3Fe	LM24	CA313 (AS313)

2 Approximate Comparison Table Cast aluminium alloy

International Organization for Standardization	European Standard	United Kingdom	Australia
ISO	EN	BS EN/BS	Australian Standard AS
AlSi8Cu3Fe	AlSi8Cu3Fe	LM24	BB325

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!