Grade X6NiCrTiMoVB25-15-2
European Standard Steel Grade 1.4980
Corresponding Standard EN 10269-2006
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
Classification Austenitic Stainless Steel
Properties Corrosion Resistance
Density 8 g/cm3
X6NiCrTiMoVB25-15-2 Chemical Element Composition Content (%)
Component C Si Mn P S Cr Ni Mo Ti V B Al
Minimum Value 0.03 - 1 - - 13.5 24 1 1.9 0.1 0.003 -
Maximum Value 0.08 1 2 0.025 0.015 16 27 1.5 2.3 0.5 0.01 0.35
①Elements not listed in this table may not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. All appropriate precautions are to be taken to avoid the addition of such elements from scrap and other materials used in production which would impair mechanical properties and the usefulness of the steel.
1 Approximate Comparison Table
China Japan United States Germany European Standard United Kingdom
GB JIS Commercial Grade UNS DIN EN/DIN W-Nr. EN Numerical Grade BS EN/BS
GH2132 SUH660 A286 S66286 X6NiCrTiMoVB25-15-2 1.4980 X6NiCrTiMoVB25-15-2 1.4980 X6NiCrTiMoVB25-15-2
2 Approximate Comparison Table Stainless steels for cold heading and cold extruding
China Japan United States International Organization for Standardization European Standard
GB ISC JIS ASTM/AISI UNS ISO Numerical Grade EN Numerical Grade
06Cr15Ni25Ti2MoAlVB
(0Cr15Ni25Ti2MoAlVB)
S51525 SUH660 660 S66286 X6NiCrTiMoVB25-15-2 4980-662-86-X X6NiCrTiMoVB25-15-2 1.4980

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!