P355NL1 1.0566 - EN 10216-3-2013

Grade	P355NL1
European Standard Steel Grade	1.0566
Corresponding Standard	EN 10216-3-2013 Seamless Steel Tubes for Pressure Purposes - Technical Delivery Conditions - Part 3: Alloy Fine Grain Steel Tubes
Classification	Alloy Steel

P355NL1 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu	Mo	N	Ti	V	Nb	Al ^ⓑ	More
Minimum Value	-	-	0.9	-	-	-	-	-	-	-	-	-	-	0.02	Nb+Ti+V ≤0.12；Cr+Cu+Mo≤0.45；Al/N≥2ⓑ
Maximum Value	0.18	0.5	1.7	0.025	0.008	0.3	0.5	0.3	0.08	0.02	0.04	0.1	0.05	-	Nb+Ti+V ≤0.12；Cr+Cu+Mo≤0.45；Al/N≥2ⓑ

P355NL1 Mechanical Properties

thickness t mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Specified Plastic Yield Strength Rp_0.2 Mpa	Elongation or Extension Rate δ %
t≤20	Normalizing (+N)	490~650	≥355	≥22（l） ≥20（T）
20＜t≤40	Normalizing (+N)	490~630	≥345	≥22（l） ≥20（T）
40＜t≤50	Normalizing (+N)	490~630	≥335	≥22（l） ≥20（T）
50＜t≤65	Normalizing (+N)	490~630	≥325	≥22（l） ≥20（T）
65＜t≤80	Normalizing (+N)	450~590	≥315	≥22（l） ≥20（T）
80＜t≤100	Normalizing (+N)	450~590	≥305	≥22（l） ≥20（T）

1 Approximate Comparison Table Pressure-Bearing Flat Steel

International Organization for Standardization		European Standard
ISO	Numerical Grade	EN	Numerical Grade
P355NL1	1.0566	P355NL1	1.0566

2 Approximate Comparison Table High-Quality Carbon Structural Steel

United States	International Organization for Standardization	Germany	France	European Standard		Sweden	United Kingdom
ASTM	ISO	DIN EN/DIN	NF EN/NF	EN	Numerical Grade	SS	BS EN/BS
A737Gr.B	E355E	TStE355	A510AP A510FP1 A530AP E355FP	P355NL1	1.0566	2107	224Gr.490 50EE

3 Approximate Comparison Table Steel Plate for Boilers and Pressure Vessels

China	International Organization for Standardization	European Standard
GB	ISO	EN
Q370R GB/T 713.2-2023	P355NH P355N P355NL1 ISO 9328-2018	P355NH P355N P355NL1 EN 10028-2017

P355NL1 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!