P195TR2 1.0108 - EN 10217-1-2019

Grade	P195TR2
European Standard Steel Grade	1.0108
Corresponding Standard	EN 10217-1-2019 Electric Welded and Submerged Arc Welded Non-Alloy Steel Tubes with Specified Room Temperature Properties
Classification	Carbon Steel

P195TR2 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr ^①	Ni ^①	Cu ^①	Mo ^①	Ti ^①	V ^①	Nb ^①	Al ^◎	More
Minimum Value	-	-	-	-	-	-	-	-	-	-	-	-	0.02	Cr+Cu+Mo+Ni≤0.7①
Maximum Value	0.13	0.35	0.7	0.025	0.015	0.3	0.3	0.3	0.08	0.04	0.02	0.01	-	Cr+Cu+Mo+Ni≤0.7①

① For qualities TR1 and TR2 supplied with non-specific inspection, the content of these elements need not be reported
unless intentionally added to the cast

◎ For Al/N ratios ≥ 2, if nitrogen is fixed by niobium, titanium or vanadium, details of which shall be reported, this requirement does not apply except that when using titanium, the steel producer shall verify that (Al + Ti/2) ≥ 0.020%.

P195TR2 Mechanical Properties

wall thickness t mm	Tensile Strength σ_b Mpa	Specified Plastic Yield Strength Rp_0.2 Mpa	Elongation or Extension Rate δ %	Impact Energy Absorption KV2 J
t≤16	320~440	ReH: ≥195	≥27（l） ≥25（t）	0°C: ≥40（l）;≥27（t） -10°C: ≥28（l）
16＜t≤40	320~440	ReH: ≥185	≥27（l） ≥25（t）	0°C: ≥40（l）;≥27（t） -10°C: ≥28（l）

P195TR2 Corresponding Standards(Same grade name, different standards)

1	EN 10216-1-2004
	P195TR2 1.0108
2	EN 10217-1-2019
	P195TR2 1.0108

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!