X9CrNi18-9 1.4325 - EN 10088-3-2005

Grade	X9CrNi18-9
European Standard Steel Grade	1.4325
Corresponding Standard	EN 10088-3-2005 Stainless steels--Part 3:Techincal delivery conditions for semi-finished products,bar,rods and sections for general purposes
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance

X9CrNi18-9 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	N
Minimum Value	0.03	-	-	-	-	17	8	-
Maximum Value	0.15	1	2	0.045	0.03	19	10	0.11

① Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. All appropriate precautions are to be taken to avoid the addition of such elements from scrap and other materials used in production which would impair mechanical properties and the suitability of the steel.

Approximate Comparison Table Austenitic Stainless Steel

China	Japan	United States	International Organization for Standardization		European Standard
ISC	JIS	UNS	ISO	Numerical Grade	Numerical Grade
S30210	SUS302	S30200	X9CrNi18-9	4325-302-00-E	1.4325

X9CrNi18-9 Corresponding Standards(Same grade name, different standards)

1	EN 10088-1-2005
	X9CrNi 18-9 1.4325
2	EN 10088-3-2005
	X9CrNi18-9 1.4325
3	EN 10088-3-2014
	X9CrNi18-9 1.4325
4	ISO 15510-2014
	X9CrNi18-9 4325-302-00-E
5	DIN EN 10088-3-2014
	X9CrNi18-9 1.4325
6	NF EN 10088-1-2005
	X9CrNi18-9 1.4325

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!