P195GH 1.0348 - EN 10217-2-2019

Grade	P195GH
European Standard Steel Grade	1.0348
Corresponding Standard	EN 10217-2-2019 Part 2: Electric Welded Non-Alloy and Alloy Steel Tubes with Specified Elevated Temperature Properties
Classification	Carbon Steel

P195GH Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu ^※	Mo	Ti ^*	V ^*	Nb ^*	Al ^◎	More
Minimum Value	-	-	-	-	-	-	-	-	-	-	-	-	0.02	Cr+Cu+Mo+Ni≤0.7
Maximum Value	0.13	0.35	0.7	0.025	0.02	0.3	0.3	0.3	0.08	0.03	0.02	0.01	-	Cr+Cu+Mo+Ni≤0.7

* The content of these elements need not to be reported unless intentionally added to the cast.
※ In order to facilitate subsequent forming operations, an agreed maximum copper content lower than indicated and an agreed specified maximum tin content shall apply

◎ For Al/N ratios ≥ 2, if nitrogen is fixed by niobium, titanium or vanadium, details of which shall be reported, this requirement does not apply except that when using titanium, the steel producer shall verify that (Al+Ti/2) ≥ 0,020 %.

P195GH Mechanical Properties

wall thickness T mm	Tensile Strength σ_b Mpa	Specified Plastic Yield Strength Rp_0.2 Mpa	Elongation or Extension Rate δ %	Impact Energy Absorption KV2 J
T≤16	320~440	or ReH ≥195	≥27（l） ≥25（t）	0°C: ≥40(l)；≥27(t) -10°C: ≥28(l)

• l = longitudinal t = transverse

P195GH Corresponding Standards(Same grade name, different standards)

1	EN 10216-2-2007
	P195GH 1.0348
2	NF EN 10216-2-2007
	P195GH 1.0348
3	NF EN 10217-2-2005
	P195GH
4	EN 10217-2-2019
	P195GH 1.0348

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!