X6CrNiCuS18-9-2 1.4570 - EN 10088-3-2005

Grade	X6CrNiCuS18-9-2
European Standard Steel Grade	1.4570
Corresponding Standard	EN 10088-3-2005 Stainless steels--Part 3:Techincal delivery conditions for semi-finished products,bar,rods and sections for general purposes
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance

X6CrNiCuS18-9-2 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu	Mo	N
Minimum Value	-	-	-	-	0.15	17	8	1.4	-	-
Maximum Value	0.08	1	2	0.045	0.35	19	10	1.8	0.6	0.1

① Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. All appropriate precautions are to be taken to avoid the addition of such elements from scrap and other materials used in production which would impair mechanical properties and the suitability of the steel.

X6CrNiCuS18-9-2 Corresponding Standards(Same grade name, different standards)

1	EN 10088-1-2005
	X6CrNiCuS 18-9-2 1.4570
2	ISO TS 15510-2003
	X6CrNiCuS18-9-2
3	EN 10088-3-2005
	X6CrNiCuS18-9-2 1.4570
4	EN 10088-3-2014
	X6CrNiCuS18-9-2 1.4570
5	ISO 15510-2014
	X6CrNiCuS18-9-2 4570-303-31-I
6	DIN EN 10088-3-2014
	X6CrNiCuS18-9-2 1.4570
7	NF EN 10088-1-2005
	X6CrNiCuS18-9-2 1.4570

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!