X10CrAlSi 7 1.4713 - EN 10088-1-2005

Grade	X10CrAlSi 7
European Standard Steel Grade	1.4713
Corresponding Standard	EN 10088-1-2005 Staehle Stainless steels. Part 1:List of stainless steels
Classification	Ferritic Stainless Steel
Properties	Corrosion Resistance
Density	7.7 g/cm³

X10CrAlSi 7 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Al
Minimum Value	-	0.5	-	-	-	6	0.5
Maximum Value	0.12	1	1	0.04	0.15	8	1

① Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. All appropriate precautions are to be taken to avoid the addition of such elements from scrap and other materials used in production which would impair mechanical properties and the suitability of the steel.

Approximate Comparison Table Ferritic Heat-Resistant Steel

Germany	France	European Standard		Russia
DIN EN/DIN	NF EN/NF	EN	Numerical Grade	GOST
X10CrAlSi7	Z8CA7	X10CrAlSi7	1.4713	15KH6SYU

X10CrAlSi7 Corresponding Standards(Same grade name, different standards)

1	EN 10088-1-2005
	X10CrAlSi 7 1.4713
2	EN 10095-1999
	X10CrAlSi7 1.4713
3	DIN EN 10095-2018
	X10CrAlSi7 1.4713
4	ISO 4955-2016
	X10CrAlSi7 4713-503-72-E

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!