50B50 G50501 - ASTM A 752-2004(R2010)

Grade	50B50
USA UNS	G50501
Corresponding Standard	ASTM A 752-2004(R2010) Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel
Classification	Alloy Steel

50B50 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	B
Minimum Value	0.48	0.15	0.75	-	-	0.4	0.0005
Maximum Value	0.53	0.3	1	0.035	0.04	0.6	-

* Small quantities of certain elements, which are not specified or required, are present in alloy steels. These elements are considered as incidental and may be present to the following maximum amounts: copper, 0.35 %, nickel. 0.25 %, chromium, 0.20 %. molybdenum, 0.06 %.

50B50 Mechanical Properties

Heat Treatment or Condition	Tensile Strength σ_b Mpa
Annealed	≤670

50B50 Corresponding Standards(Same grade name, different standards)

1	ASTM A29/A29M-2012
	50B50 G50501
2	ASTM A29/A29M-2020
	50B50 G50501
3	ASTM A519/A519M-2024
	50B50
4	ASTM A 752-2004(R2010)
	50B50 G50501
5	ASME SA-29/SA-29M-2023
	50B50 G50501

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!