13MnNi 6-3 1.6217 - EN 10028-4-2017

Grade	13MnNi 6-3
European Standard Steel Grade	1.6217
Corresponding Standard	EN 10028-4-2017 Flat Products Made of Steels for Pressure Purposes - Part Four: Nickel Alloy Steels with Specified Low Temperature Properties
Classification	Alloy Steel

13MnNi 6-3 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Ni ^①	V	Nb	Al	More
Minimum Value	-	-	0.85	-	-	0.3	-	-	0.02	Cr+Cu+Mo≤0.50
Maximum Value	0.16	0.5	1.7	0.025	0.01	0.85	0.05	0.05	-	Cr+Cu+Mo≤0.50

① For nominal thicknesses ≤ 40 Mm, a minimum nickel content of 0,15 % Is permitted.

13MnNi 6-3 Mechanical Properties

	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
t≤30	Normalizing (+N), Normalizing and Tempering (+NT)	490~610	ReH ≥355	≥22
30＜t≤50	Normalizing (+N), Normalizing and Tempering (+NT)	490~610	ReH ≥345	≥22
50＜t≤80	Normalizing (+N), Normalizing and Tempering (+NT)	490~610	ReH ≥335	≥22

Approximate Comparison Table Pressure-Bearing Flat Steel

13MnNi6-3 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!