CR900T/ 700Y-MS - GMW 3399-2018

Grade	CR900T/ 700Y-MS
Corresponding Standard	GMW 3399-2018 Multi-phase and Ultra-high Strength Sheet Steel
Classification	Alloy Steel

CR900T/ 700Y-MS Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cu	Al	More
Minimum Value	-	-	-	-	-	-	0.01	(Ni+Cr+Mo)<1.5*；B:N/A
Maximum Value	0.13	0.5	1.2	0.02	0.01	0.2	-	(Ni+Cr+Mo)<1.5*；B:N/A

* In addition to requirements shown in the table

CR900T/ 700Y-MS Mechanical Properties

Heat Treatment or Condition	Tensile Strength σ_b Mpa	Specified Plastic Yield Strength Rp_0.2 Mpa	Elongation or Extension Rate δ %
Cold Rolling	900~1100	700~1000	L0=50mm ISO Ⅰ: ≥3 ISO Ⅲ:≥3.5 L0=80mm ISO Ⅱ: ≥3

CR900T/700Y-MS Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!