HR580T/ 440Y-FB - GMW 3399-2018

Grade	HR580T/ 440Y-FB
Corresponding Standard	GMW 3399-2018 Multi-phase and Ultra-high Strength Sheet Steel
Classification	Alloy Steel

HR580T/ 440Y-FB Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Al	More
Minimum Value	-	-	-	-	-	0.015	(Ni+Cr+Mo)<1.5*；
Maximum Value	0.18	0.5	2	0.05	0.01	-	(Ni+Cr+Mo)<1.5*；

* In addition to requirements shown in the table

HR580T/ 440Y-FB Mechanical Properties

Heat Treatment or Condition	Tensile Strength σ_b Mpa	Specified Plastic Yield Strength Rp_0.2 Mpa	Elongation or Extension Rate δ %
Hot Rolling	580~700	440~600	L0=50mm ISO Ⅰ: ≥16 ISO Ⅲ: ≥17 L0=80mm ISO Ⅱ: ≥15

HR580T/440Y-FB Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!