中文版
Home Material EN 10088-2-2005
简体 | 繁體
Grade X5CrNiMo17-12-2
European Standard Steel Grade 1.4401
Corresponding Standard EN 10088-2-2005
Stainless steels – Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
Classification Austenitic Stainless Steel
Properties Corrosion Resistance
Density 8 g/cm3
X5CrNiMo17-12-2 Chemical Element Composition Content (%)
Component C Si Mn P S ⓑ Cr Ni Mo N
Minimum Value - - - - - 16.5 10 2 -
Maximum Value 0.07 1 2 0.045 0.015 18.5 13 2.5 0.11
X5CrNiMo17-12-2 Mechanical Properties
thickness
t
mm		 Heat Treatment or Condition
Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
% 		Impact Energy Absorption
KV2
J
t≤8; (transverse) Cold Rolled Steel Strip (C) and Solution Annealing 530~680 ②③
≥240		 ②④⑤
≥40
t≤13.5; (Transverse) Hot Rolled Steel Strip (H) and Solution Annealing 530~680 ≥220 ≥40 ≥60
t≤75; (transverse) Hot Rolled Medium Thick Plate (P) and Solution Annealing 520~670 ≥220 ≥45 ≥60
t≤13.5; (Longitudinal) Hot Rolled Steel Strip (H) and Solution Annealing ≥100
t≤75; (Longitudinal) Hot Rolled Medium Thick Plate (P) and Solution Annealing ≥100
1 Approximate Comparison Table Austenitic Stainless Steel
China Taiwan, China Japan South Korea United States International Organization for Standardization Germany France European Standard Sweden United Kingdom
GB ISC CNS JIS KS ASTM UNS ISO Numerical Grade DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade SS BS EN/BS
06Cr17Ni12Mo2 S31608 316 SUS 316 STS 316 316 S31600 X5CrNiMo 17-12-2 4401-316-00-I X5CrNiMo 17-12-2
(X5CrNiMo 18-10)
X5CrNiMo 17-13-3
(X5CrNiMo 18-12) 		1.4401
1.4401
1.4436
1.4436 		Z6CND 17-11
Z6CND 17-12 		X5CrNiMo 17-12-2
X3CrNiMo 17-13-3 		1.4401
1.4436 		2347
2343 		316S16
316S31
2 Approximate Comparison Table Austenitic Heat-Resistant Steel
China Taiwan, China Japan South Korea United States International Organization for Standardization Germany France European Standard Russia Sweden United Kingdom
GB ISC CNS JIS KS ASTM UNS ISO DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade GOST SS BS EN/BS
06Cr17Ni12Mo2
(0Cr17Ni12Mo2)
0Cr18Ni12Mo2Ti 		S31608 316 SUS 316 STS 316 316 S31600 X5CrNiMo 17-12-2 X5CrNiMo 17-12-2
(X5CrNiMo 18-10)
X5CrNiMo 17-13-3
(X5CrNiMo 18-12) 		1.4401
1.4401
1.4436
1.4436 		Z6CND 17-11
Z6CND 17-12 		X5CrNiMo 17-12-2
X3CrNiMo 17-13-3 		1.4401
1.4436 		08Х17Н13М2Т 2347
2343 		316S16
316S31
3 Approximate Comparison Table Austenitic Stainless Steel
China Japan United States Germany France European Standard Russia Sweden United Kingdom
GB JIS ASTM DIN EN/DIN NF EN/NF EN Numerical Grade GOST SS BS EN/BS
0Cr17Ni12Mo2 SUS316 316 X5CrNiMo17-12-2 Z6CND17-11
Z7CND17-11-02
Z7CND17-12-02 		X5CrNiMo17-12-2 1.4401 08KH16N11M3 2347 316S31
4 Approximate Comparison Table Stainless Steels for Cold Heading and Cold Extruding
China Japan United States International Organization for Standardization European Standard
GB ISC JIS ASTM/AISI UNS ISO Numerical Grade EN Numerical Grade
06Cr17Ni12Mo2
(0Cr17Ni12Mo2) 		S31608 SUS316 316 S31600 X5CrNiMo17-12-2 4401-316-00-I X5CrNiMo17-12-2 1.4401
X5CrNiMo17-12-2 Corresponding Standards(Same grade name, different standards)
1 EN 10088-1-2005
X5CrNiMo 17-12-2 1.4401
2 EN 10296-2-2005
X5CrNiMo17-12-2 1.4401
3 EN 10253-4-2003
X5CrNiMo17-12-2 1.4401
4 EN 10263-5-2001
X5CrNiMo17-12-2 1.4401
5 EN 10269-2006
X5CrNiMo17-12-2 1.4401
6 EN 10250-4-1999
X5CrNiMo 17-12-2 1.4401
7 ISO TS 15510-2003
X5CrNiMo17-12-2
8 EN 10088-2-2005
X5CrNiMo17-12-2 1.4401
9 DIN 17440-1972
X5CrNiMo 17-12-2 X5CrNiMo 18-10 1.4401
10 EN 10088-3-2005
X5CrNiMo17-12-2 1.4401
11 EN 10297(2)-2005
X5CrNiMo17-12-2 1.4401
12 EN 10269-2013
X5CrNiMo 17-12-2 1.4401
13 EN 10088-3-2014
X5CrNiMo17-12-2 1.4401
14 ISO 15510-2014
X5CrNiMo17-12-2 4401-316-00-I
15 NF EN 10269-1999
X5CrNiMo17-12-2 1.4401
16 VDI 2230-1-2015
X5CrNiMo 17-12-2 1.4401
17 DIN EN 10263-5-2018
X5CrNiMo 17-12-2 1.4401
18 DIN EN 10269-2014
X5CrNiMo 17-12-2 1.4401
19 ISO 9328-7-2018
X5CrNiMo17-12-2
20 DIN EN 10088-3-2014
X5CrNiMo17-12-2 1.4401
21 DIN EN 10270-3-2012
X5CrNiMo17-12-2 1.4401
22 ISO 683-18-2014
X5CrNiMo17-12-2 4401-316-00-I
23 ISO 4954-2018
X5CrNiMo17-12-2 4401-316-00-I
24 NF EN 10088-2-2005
X5CrNiMo17-12-2 1.4401
25 NF EN 10088-1-2005
X5CrNiMo17-12-2 1.4401
26 NF EN 10028-7-2008
X5CrNiMo17-12-2 1.4401
27 NF EN 10296-2-2005
X5CrNiMo17-12-2 1.4401
28 NF EN 10028-7-2000
X5CrNiMo17-12-2 1.4401
29 EN 10263-5-2017
X5CrNiMo 17-12-2 1.4401 SS316
30 DIN EN 10151-2002
X5CrNiMo17-12-2 1.4401
31 ISO 4954-2-2024
X5CrNiMo17-12-2 4401-316-00-I
32 DIN EN 10296-2-2006
X5CrNiMo17-12-2 1.4401
33 EN 10272-2016
X5CrNiMo17-12-2 1.4401
34 EN 10217-7-2021
X5CrNiMo 17-12-2 1.4401
35 EN 10088-2-2024
X5CrNiMo17-12-2 1.4401
36 EN 10028-7-2016
X5CrNiMo17-12-2 1.4401

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!